Ethernet Extender PoE Extender Secure Encryption https://ethernetextender.com Made in the USA Ethernet Extender PoE Extender Fri, 28 Apr 2017 19:47:24 +0000 en-US hourly 1 https://wordpress.org/?v=4.7.4 WHY A MADE IN THE USA ETHERNET EXTENDER MATTERS https://ethernetextender.com/usa-made-ethernet-extender/ Mon, 24 Oct 2016 19:29:07 +0000 https://ethernetextender.com/?p=11496 ...

The post WHY A MADE IN THE USA ETHERNET EXTENDER MATTERS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
WHY A MADE IN THE USA ETHERNET EXTENDER MATTERS

There are many kinds of IT shoppers: those who insist on finding the lowest price, even at the cost of sacrificing security, performance and quality products, those who insist on the highest quality, security and performance in IT products, even if it isn’t at a rock-bottom price, and finally those who try to find a balance without sacrificing in too many of the above described areas. Where IT products like an Ethernet Extender are concerned, those quality differences can be profound. But quality isn’t the only reason to select IT hardware that’s Made in the USA. Here are several reasons why that little sticker on any IT LAN product and packaging is so meaningful…

You Demand the Absolute Best in LAN Security
WHY MADE IN THE USA ETHERNET EXTENDER MATTERS
Deceptively low cost, non USA Ethernet Extender quite often contain “backdoors.” Backdoors are major security vulnerabilities deliberately built into equipment firmware like an Ethernet Extender so that the manufacturer or government can “Listen in to your Network” later, without the buyer’s knowledge.

Hardware manufacturers and software developers can leave what’s called a “backdoor” in their products. Chinese manufactured backdoors are known and deliberate security vulnerabilities that allow the vendor, or potentially a government or other outside party, to access the product after the sale, without the knowledge or consent of the user. Not only can the vendor, government, or other entity access the backdoor vulnerability while you own the Ethernet extender, but also hackers often figure out these vulnerabilities and exploit these Internet backdoors. Some known banned LAN hardware vendors are Huawei, VersaTek, Lenovo, China Telecom and ZTE, however these are still knowingly re-branded (Trojan horse disguised) and brought into the US under brands you think you trust.  Demand a guarantee and proof that it is Made in the USA! before you put this spyware enabled Ethernet Extender in your network.
Why risk your company’s business secrets to eavesdropping Chinese competitors?

While “Made in the USA” doesn’t guarantee that the products you buy don’t have a backdoor access, it is a lot safer than products made in China and other parts of the world where these backdoors are commonplace and lately state sponsored programs. Do you really want a foreign government peeking in on your internal LAN traffic and business secrets?

You Want to Steer Clear of Potential Counterfeit Hardware
Chinese Ethernet Extender
When you’re ordering online or buying from someone other than an established retailer, it’s easier than you might expect to end up with a counterfeit product. Common indications that what you’re looking at isn’t the real thing include (but are not limited to) a slight misspelling of the product name or the absence of the Made in the USA label. Also, if a product that you know regularly sells for well over $200 is offered for half or less than this price, it could be a counterfeit.

You can avoid counterfeit products by buying only from reputable businesses you know. For example, go directly to the website of a USA Ethernet Extender manufacturer’s website or to a distributor that you know properly vets their products and suppliers. If you shop online, carefully check that store’s rating and read their reviews. Look for indications that they might be selling counterfeits, such as poor packaging, instructions that are written only in a foreign language, and extraordinarily low prices on high-quality products.

You Need to Be Able to Read & Understand the Instructions & Warranty Info
beware of Chinese Ethernet Extender

IT products made in non-English speaking countries might be in a different language. Even when translated, these instructions can be very difficult to understand.

A final reason for buying only a Made in the USA Ethernet Extender is that you will be able to read and understand the instructions. While products made in China and other non-English speaking nations may come with “English” instructions, the translations are often so poor that they are difficult to understand. Likewise, the warranty might be difficult or impossible to read.  Next try Technical Support. Are they able to communicate effectively enough with you and can they give you clear expert networking or custom manufacturing support in English? Are you able to get custom Ethernet Extender units at the time of order to your needs or does it take 4 months and lots of overseas design time with large quantities just to get what you really need?

If you buy a product that wasn’t made in the USA, you probably have no legal recourse if the company doesn’t make good on their warranty.
Any worthwhile USA Ethernet Extender manufacturers and retailers should have a minimum of 4 year if not, Lifetime warranties to stand by their Made in the USA Quality.

Was your Ethernet Extender Made in the USA?
If not, talk to us and we may be able to offer a trade up of your Extender for an Enable-IT Secure Ethernet Extender like our 821 LAN Extender Kit See product details here

The post WHY A MADE IN THE USA ETHERNET EXTENDER MATTERS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
Made in the USA Matters Enable-IT Ethernet Extender Delivers Why Made in the USA Ethernet Extender Matters. Here are Several Reasons Why That Little Sticker on Any IT LAN Product and Packaging is So Meaningful. Made in the USA WHY MADE IN THE USA ETHERNET EXTENDER MATTERS Chinese Ethernet Extender beware of Chinese Ethernet Extender
NEW IP68 WATERPROOF POE EXTENDER https://ethernetextender.com/ip68-waterproof/ Thu, 01 Sep 2016 14:31:10 +0000 https://ethernetextender.com/?p=10387 ...

The post NEW IP68 WATERPROOF POE EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
Enable-IT is very proud to once again leapfrog the industry and now has multiport, IP68 Rated, Weatherproof Gigabit Ethernet Extenders and PoE Extenders.

The newly designed model also comes with a limited lifetime warranty that surpasses any current manufacturer warranties including our own industry leading 4-year warranty.

Built on our proprietary design and globally recognized ruggedized styling, ONLY Enable-IT can deliver!.
One of our most popular uses for this weatherproof enclosure is for our Enable-IT 860W PRO Outdoor Gigabit Ethernet Extender IP68 Rated Gigabit Ethernet Extender kit.

Drives Gigabit Ethernet up to 4,100ft / 1,250m away – TWELVE times further than the IEEE 802.3 specifications for Ethernet LAN limits of just 328 feet. Weatherproof IP68 rated 4-Port Gigabit LAN Switch on each end.
Includes a High Power Gigabit 56V – 61W PoE injector. Requires only (1) single power source.

Or our Enable-IT™ 828WP 3-port IP68 Rated Weatherproof Gigabit PoE Extender Kit is a complete solution that drives incremental Gigabit Ethernet up to 240m or 800ft and can be deployed with up to 3 828W units in a series to reach 2,000ft (600m) at blazing fast Gigabit full wire speed. Both 2-pair and 4-pair PoE output is standard to support your high powered PoE Devices.

This professional grade Weatherproof solution is ideal for putting your PoE devices where you need them and not where you are limited to by IEEE Ethernet distance restrictions.
See Details Here ►
Article Ratings

The post NEW IP68 WATERPROOF POE EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
MISSION CRITICAL ETHERNET LAN EXTENDER https://ethernetextender.com/mission-critical-lan-ethernet-extender/ Wed, 13 Jul 2016 21:52:14 +0000 https://ethernetextender.com/?p=10390 ...

The post MISSION CRITICAL ETHERNET LAN EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

MISSION CRITICAL ETHERNET LAN EXTENDER – BEST ON THE PLANET ! Enable-IT has created an Instant On single port Ethernet Extender kit (released June 2016).

This new breed of Ethernet LAN Extender leverages mission critical reliability and performance. As soon as you power on the units with the 1-pair of Interlink wiring, the Ethernet Extension is instantly on and running – no visible sync waiting. No other Ethernet LAN Extender on the PLANET is capable of this feat.

If your network performance cannot wait for any traditional Ethernet Extender to establish a sync with a partner unit, this kit is exactly what your looking for to deliver Mission Critical power cycle reboot availability. The newly designed model also comes with a limited lifetime warranty.

Ethernet LAN Extender

Enable-IT 821 Ethernet LAN Extender

Built on our proprietary design and globally recognized ruggedized styling. The PLANET’s most trusted and deployed brand, Enable-IT™, designs and manufactures the 821 Ethernet LAN Extender in the USA.

This kit is available in a slick professional grade IP68 Waterproof enclosure for those seeking outdoor installations in extreme environments.
See the 824WP here for reference. ►
American-made quality craftsmanship and reliability is what Enable-IT is known for. The 821 kit can extend Ethernet LAN up to 2,500 ft (762 m) away over a single pair of copper wiring (e.g. telco). Additionally, a single CO can support up to 9 CPE units on the same pair of wiring, and an integrator’s entire Ethernet extender implementation would remain fully transparent to the protocols, applications, and MAC addresses on the host network.

These units have built in encryption to protect the link between the units and most importantly your digital contents from foreign competitive interests that have shown up in our copycat clone competitors equipment – some of which have been banned in the USA.

Designed & Made in the USA with quality and pride. These American-made ENABLE-IT™ 821 ETHERNET LAN EXTENDER use industry LAN standard RJ-45 (8-pin) connectors to make installing in most any environment very easy.
We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.

Ethernet Extension Experts design and manufacture the 821 ETHERNET LAN EXTENDER kit, along with its entire product line, in the USA which makes us more responsive to customer needs. We take great pride in using the highest quality materials and actual craftsmanship when building our products. We can even customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.

CLICK TO LEARN MORE ►

The post MISSION CRITICAL ETHERNET LAN EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
LAN Extender Mission Critical Instant On Ethernet Extender Video Ethernet LAN Extender Leverages Mission Critical Reliability and Performance. Instantly on and Running – No Visible Sync Waiting. Made in the USA. LAN Extender Enable-IT 821 Mission Critical Ethernet LAN Extender Enable-IT 821 Mission Critical Ethernet LAN Extender
PoE PERFORMANCE ENHANCED 22AWG https://ethernetextender.com/poe-performance/ Fri, 25 Sep 2015 20:52:54 +0000 https://ethernetextender.com/?p=14101 ...

The post PoE PERFORMANCE ENHANCED 22AWG appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

Power Over Ethernet Applications Best Performance Is Driven By 22-AWG Category 5e Cabling

The most prevalent obstacle faced with Power over Ethernet (PoE) and high-power PoE+ applications is the length at which you can transmit the power over standard Category Rated cabling while maintaining high-performance data communications. The further you try to push the PoE signal down the line, the more it degrades and eventually will not transmit. Enable-IT PoE Extenders utilize professional grade extension technologies in order to deliver PoE to the greatest distances possible over existing Category Rated cabling.

Superior Essex International, a global leader in the design, manufacture and supply of cable and wire products, announced in September 2015 the introduction of PowerWise Category 5e cabling, a 22-AWG (gauge) communications data cable. This cabling has been designed specifically for driving Power over Ethernet (PoE) over longer distances requiring high current levels.

PowerWise Category 5e Cabling Specifications
  • Provides 88% power efficiency for 4 pair PoE+ applications over 328 feet or 100 meters.
  • 22 gauge copper wires are 59% bigger than 24 gauge copper wires usually used in Cat5e cabling.
  • Significantly higher energy savings rather than using regular Cat5e or Cat6 cabling over a 10 year period powering a 71W PoE device beyond 328ft or 100m.
  • Supports IEEE 802.3bt 4 Pair PoE standard which can transmit up to 100 watts of power over the same copper pairs used for data communications.

The Vice President of Marketing for Superior Essex, Will Bryan, stated, “The Internet of Things market falls into 3 groups regarding cabling needs. The first group requires 10-Gigabit Ethernet communications, like WiFi access points – Cat6A cable is the only way to provide such high-speed data & PoE. The second group of devices have low power and throughput requirements, like card readers and door entry systems. The third group demands a relatively high current draw, but low throughput data. For these devices, PowerWise Cat5e is the best cable design cost, efficiency and performance.”

Bryan also added, “As devices now require up to 960 milliamps of current over 4 pair data cables, there is a bonafide concern over the potential danger poised by high temperature increases in 24 gauge wires.” “You could use Cat6A cables for each of these devices requiring high current, however, the most cost-effective solution would be utilizing PowerWise Cat5e cables that don’t require 10-Gigabit data.”

Check out Enable-IT’s professional grade PoE Extenders secured in IP68 Waterproof enclosures for those seeking outdoor installations in extreme environments. Perfect for driving high-speed data communications & high-powered PoE+ up to 4,100 feet or 1,249 meters over existing 2-4 pair Category Rated cabling.

Click Here For Waterproof PoE Extenders ►

The post PoE PERFORMANCE ENHANCED 22AWG appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
TRAFFIC MOVES FAST AND EFFICIENTLY FOR TEXAS https://ethernetextender.com/poe-extender-moves-traffic-faster/ Sun, 16 Aug 2015 20:15:25 +0000 https://www.ethernetextender.com/?p=5870 ...

The post TRAFFIC MOVES FAST AND EFFICIENTLY FOR TEXAS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
Enable-IT Outdoor Waterproof Gigabit PoE Extender Keeps the traffic moving fast for Metro Texas!

The North Tarrant Express and LBJ Express Projects in North Texas are the largest and most comprehensive traffic control systems built in the USA in the last 20 years and standardized on Enable-IT PoE Extension to support the fully integrated (MLS) Managed Lane Systems. To keep things flowing quickly and efficiently, the Enable-IT 828W and 828WP solutions provide full IP68 rated protection for Gigabit PoE delivery.

This Kapsch TrafficCom project encompasses delivery of a Toll Collection System (TCS), Intelligent Transportation System (ITS), and Network Communication System (NCS), creating a fully integrated MLS over more than thirty miles of “managed lanes” – specifically used, administered and tolled lanes to arrange the traffic according to different requirements and demands – with sixty-five toll lanes and thirty-three toll zones.

Kapsch TrafficCom selected an Enable-IT PoE Extender and is a provider of high-performance Intelligent Transportation Systems (ITS) in the application fields of toll collection, urban access management and traffic safety and security. Kapsch TrafficCom covers the entire value creation chain of its customers as a one-stop shop by providing products and components as well as subsystems as open market products, by integrating them into turnkey systems or by developing end-to-end solutions, including services for the technical and commercial operations of systems. Within its current core business of electronic toll collection (ETC), Kapsch TrafficCom designs, builds and operates primarily electronic toll collection systems, in particular for multi-lane, free-flow traffic. With 280 references in 41 countries on all five continents and with almost 70 million on-board units delivered and about 18,000 lanes equipped, Kapsch TrafficCom has positioned itself among the internationally recognized suppliers of electronic toll collection worldwide. In North America, the company operates offices in Virginia, Texas, California, Maryland, Pennsylvania, Ontario, and Mexico.

The Enable-IT 828WP Outdoor IP68 Rated Waterproof Gigabit PoE Extender Solution is ideal for deploying your outdoor PoE Devices like IP PoE Cameras, PoE Sensors and PoE WiFi Access Points. Enable-IT, Inc. specializes in USA design and USA factory direct manufacture of Extended Ethernet and PoE solutions. Serving US National Security needs, US federal agencies and the commercial sector since 1996.

Security and encryption of your network should be of the highest importance in today’s environment where we are flooded with news of Chinese or Russian breaches of our government and business sensitive data. Often times, this is accomplished by the hidden spyware in Chinese made cheap network products, so be careful and aware when you think you’re getting a deal; Always ask where it’s made and by whom!
When in doubt ask if their gear is certified secure encrypted!

The post TRAFFIC MOVES FAST AND EFFICIENTLY FOR TEXAS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
ALWAYS HONEST AND FREE EXPERT CONSULTATIONS https://ethernetextender.com/honest-free-expert-consultations/ Thu, 02 Jul 2015 14:33:04 +0000 https://www.ethernetextender.com/?p=5592 ...

The post ALWAYS HONEST AND FREE EXPERT CONSULTATIONS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
With over 45 years in Systems Engineering, Network Communications and Telecommunications – The Experts at Enable-IT are the most reliable and honest source for technical support regardless of whose products you use.
We certainly believe our US designed and Made in the USA products offer superior, unmatched benefits and our in-house manufacturing and expert design engineers can get on calls at any time you need to create custom solutions for any challenge you face. However, even though we are truly the innovators and creators of Ethernet and PoE extension, we are honest and trustworthy in our opinions and recommendations. We will tell you straight if you can use other products to meet your needs.

Enable-IT, Inc. specializes in expert USA design and USA factory direct manufacture of Extended Ethernet and PoE solutions. Serving US National Security needs, US federal agencies and the commercial sector since 1996. Security and encryption of your network should be of the highest importance in today’s environment where we are flooded with news of Chinese or Russian breaches of our government and business sensitive data. Often times, this is accomplished by the hidden spyware in Chinese made cheap network products so be careful and aware when you think you’re getting a deal; Always ask where it’s made and by whom!

Call us Toll Free at (888) 309-0910, (702) 924-0402 or Chat with us Live

China-Safe-LAN
Article Ratings

The post ALWAYS HONEST AND FREE EXPERT CONSULTATIONS appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
Enable-IT China Safe LAN Enable-IT China Safe LAN
DIFFERENCES BETWEEN RG6 VERSUS RG6Q COAX CABLING https://ethernetextender.com/coax-cabling-types/ Tue, 28 Apr 2015 17:59:07 +0000 https://ethernetextender.com/?p=14321 ...

The post DIFFERENCES BETWEEN RG6 VERSUS RG6Q COAX CABLING appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

The Best Performance Coax Cabling Types: RG6 VS. RG6Q

Coax cabling is typically used for television and high speed internet signals which were very prevalent in older analog camera systems. The coax cabling, or sometimes called RG, contains a single silver pin usually at one end of the cable which is encased in a screw-on bracket.

Usually markings on the bracket distinguish the type of coaxial cable you are using, however the wires are mostly identical with only minor weight and size fluctuations. But selecting various cabling types can make a significant difference in performance.

When selecting the proper RG cable you should take the following into consideration:

– The location in which you will be running the cable and grade of insulation.
– The diameter of the inner conductor.
– The space available for the voltage and signal.
– The amount of electricity required to power on your desired device.

Basic Components of an RG Cable
    Most RG cables follow a familiar structure.

  • Insulated inner conductor (usually copper or aluminum) shielded by a copper foil and encased in black or white plastic.
  • The conductor carries the signal while the insulation and shield maintain the conductor’s integrity.
  • Insulation comes in various gauges or thickness, which increases the diameter of the cable, size and weight – all of which are usually microscopic in scale.

Main Differences Between RG6 and RG6Q Cables

Quality of Insulation

One thing that various coaxial cables have in common is the classification of their insulation. Since these cables are often deployed outdoors or underground, the effects of the environment – rain, snow, wind, and heat – are of important consideration.

The typical coax cable has a classification of MIL-C-17, which is the standard grade required to protect the inner communications from common environmental damage. Other coaxial cables – used in more extreme environments – boast the heavy duty classification of M17/74, which is a military grade standard. M17/74 insulation degrades at a much slower rate than MIL-C-17, and protects the signal more effectively.

RG69 VS. RG60 VS. RG6 & RH6Q

RG59 cables used to be the industry standard for home-use applications, however RG6 has slowly been gaining traction. Note: RG6 is not the same at RG60, which is a rare type of coax cable and typically difficult to find.

The main difference in the coax cabling is conductor size, with RG6, thicker diameter increases the conductivity at frequencies of 50 megahertz up to 1.5 gigahertz. The better the signal, the better the picture of your home entertainment system, and the higher your internet speed will be. Nowadays, RG6 or RG6Q would be the best possible cabling as the quality High-Definition (HD) and frequency of the broadcast has vastly improved over time. Standard HD runs at a 37 megahertz signal so RG59 can handle it easily, but RG6 will always be better as the signal doesn’t degrade as much.

There are instances where larger cabling is not necessarily always better, for example: certain size cabling is intended for specific voltages and broadcast frequencies. A conductor can be too big for the information to flow through it efficiently, and thus creates various undesirable effects such as “ghosting” – an image that stutters or doubles up on itself. Thus, deciding which RG cable to use is specific to each application. RG6, for example, runs at too high of a frequency for transmitting video projector or composite connections. Utilizing the most powerful cable for your television will not necessarily improve the picture quality.

RG6 VS. RG6Q VS. RG11

RG6 cables are used for most home-entertainment systems, knowing the difference between RG6 and RG6Q is very important. The main thing that distinguishes RG6 and RG6Q is the type of inner shielding used to insulate the delicate wires. The superior “quad” shielding of the RG6Q minimizes outside disturbance and thus maintains a higher integrity of signal.

The difference in diameter also increases the amount of voltage that can be passed through the conductor, with RG6Q cables allowing more room for the electricity to do its magic. As technology improves more competing signals reach the airwaves, the increased insulation will become increasingly important – especially with 4K technology on the market.

RG11 cables function the same way that RG6’s do, but RG11 have better insulation and a larger diameter.

RG8 & RG213

RG8 and RG213 varieties of coaxial cabling are used when an especially high voltage – higher than RG6 devices – is required to carry the signal from the antenna to the device. An example being a two-way radio tower. These are often used to broadcast VHF and UHF signals, although they can also be used for picture or data.

In these cases, high voltage increases the chance of signal loss, so the strength and width of the cable must be amended accordingly. The RG8 cables max out a 4,000 Volts between conductor and insulation, while RG213 can withstand 5,000 Volts. Respectively, RG213 cables are wider in diameter, slightly heavier (around 10.6 lbs vs. 10.5 lbs) and more fragile in higher temperatures. However, RG213 cables offer an improvement in insulation quality, so besides heat, they are more sturdy and degrade more slowly.

What Coax Cabling is Best for Each Application?
  • RG6 varieties of coax are found most in home-use applications with Television and HD equipment.
  • RG11 will work best for most home-use applications involving Television & HD equipment.
  • RG6Q is the best for consumer grade telecommunications.
  • RG8 & RG213 work best for antenna radio signals like VHF and UHF or for picture and data too.
  • RG59 can handle older Television frequencies and okay for older security camera networks using analog technology.

Click Here to View our Coax Cabling Extenders ►

The post DIFFERENCES BETWEEN RG6 VERSUS RG6Q COAX CABLING appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
G.HN EXTENDER https://ethernetextender.com/g-hn-extender/ Fri, 20 Mar 2015 17:12:09 +0000 https://ethernetextender.com/?p=14043 ...

The post G.HN EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

Enable-IT Yet Again Leapfrogs the Industry Offering Powerline Instant On G.Hn Extender Products!

The Enable-IT G.Hn breed of Ethernet LAN Extender & PoE Extender Products leverage INSTANT ON communication technology with mission critical reliability and high-speed performance. Utilizing just a single pair of telephone wiring for data communications, or 2 pair minimum for PoE applications, the Ethernet & PoE Extension is instantly on and transmitting data – no handshaking period, whatsoever. This is the world’s FIRST & ONLY Ethernet Extender & PoE Extender Product line manufactured with this technology.

Key G.Hn Extender Features
  • Drive transparent Ethernet data over 2,500 feet or 762 meters connecting any type of LAN devices.
  • 100MBPS Full-Duplex High-Speed Data
  • Utilizes existing 1 pair wiring minimum for data communications.
  • A single CO can support up to 9 CPE units on the same pair of wiring.
  • Drives PoE over 2-4 pair wiring using any Category Rated cabling (CAT3 to CAT6 or better) up to 2,000 feet or 609 meters.
  • INSTANT ON, plug-and-play installation, no configuration required.
  • Small form factor, versatile functionality allowing for deployment in the most demanding industries.
  • Waterproof, Submersible IP68 Rated option available for extreme outdoor applications.
  • Professional, business grade products wholly designed and made in the USA.
  • Same day, insured, flat rate shipping in the USA.
  • Limited Lifetime Warranty

Check out the professional grade G.Hn Extender secured in a IP68 Waterproof enclosure for those seeking outdoor installations in extreme environments.

Submerse Yourself Here To See the 824WP for reference. ►

G.Hn Extender

Enable-IT 821 Ethernet LAN Extender

Built on our trademarked design and globally recognized ruggedized styling. The WORLDS’s most trusted and deployed brand, Enable-IT™, designs and manufactures the G.Hn Extender & PoE Extender Products in the USA.
American-made quality, craftsmanship and reliability is the basis of our company.

These units have built in encryption to protect the link between the units and most importantly your digital contents from foreign competitive interests that have shown up in our copycat clone competitors equipment – some of which have been banned in the USA.

CLICK TO LEARN MORE ►

The post G.HN EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
G.Hn Extender - Instant On Ethernet & PoE Extenders Video The Enable-IT G.Hn Extender Products Are Off-The-Shelf, Instant On LAN Devices Which Can be Deployed & Customized For The Most Challenging Industries. G.Hn Extender Enable-IT 821 Mission Critical Ethernet LAN Extender Enable-IT 821 Mission Critical Ethernet LAN Extender
DEEP SEA SPECIALITY EXTENDER https://ethernetextender.com/deep-sea-speciality-extender/ Sat, 07 Mar 2015 21:49:51 +0000 https://ethernetextender.com/?p=13866 ...

The post DEEP SEA SPECIALITY EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

Enable-IT Manufactures Industry-Leading Deep Sea Speciality Extender Products That Dive To The Greatest Depths Of The Ocean

Key Features
  • Extends Gigabit Ethernet data below the ocean surface to depths of 9,000 feet or 2,743 meters.
  • Pushes PoE (Power over Ethernet) to depths of 2,500 feet or 762 meters below sea level.
  • Utilizes existing 1 pair copper wiring or Category Rated cabling (CAT3 to CAT6 or better).
  • Plug and go installation, no configuration necessary.
  • Professional, deep sea speciality grade products wholly designed and manufactured in the USA.
  • Certified, secure encrypted Ethernet & PoE extension technologies.
  • Miniature form factor tailoring to the most demanding specifications.
  • Extremely cost-effective solutions in lieu of fiber products too brittle for underwater applications.
  • Same day, flat rate shipping with insurance to anywhere in the USA.
  • Limited Lifetime Warranty

Deep Sea Exploration Challenges

Enable-IT Deep Sea Speciality Extender Technology is prevalent in assisting operations in just about every industry involved in ocean exploration and research. Underwater Remote Operated Vehicle (ROV) and MiniROV Manufacturing companies from all over the world reach out to Enable-IT to provide cost-effective solutions to their issues in extending Ethernet data and / or Power over Ethernet (PoE) to operate and control underwater submersibles.

Oftentimes, these manufacturers are faced with challenges that need to be resolved before they can operate at ocean depths greater than 1,000 meters. Some of these problems include: dealing with the high-amount of drag on their ROVs as they descend deeper into ocean, miniaturization of control electronics, the design of lighter weight pressure housings, and power and data transmission over very long cable/tether/umbilical lengths. These tethers which house the electrical and communications wiring add a significant amount of drag from the weight and gauge of the tethers.

The issue of the drag, weight, and gauge of the tether and distances at which communications and power could be transmitted was put to the task by Enable-IT and their Deep Sea Speciality Extender Technology.

Enable-IT Deep Sea Speciality Extender Technology

Thanks to Enable-IT, customer’s specific needs are met and exceeded because of the innovative engineering and manufacturing expertise available. Our hands-on engineering staff and sales team are able to work with one another closely and precisely to determine what the best possible solution will be and how to overcome any obstacles presented by our customers.

No where else in the industry will you come across a company who offers a minimum custom order quantity of just 5 units and will research, develop, and manufacture professional, deep sea speciality products tailored to your needs.

Thus, Enable-IT Deep Sea Speciality Extender products were born. Thanks to Ethernet extension technology, Enable-IT was able to miniaturize deep sea-worthy extenders, ROV manufacturers have been able to multiplex their transmissions, and send PoE to ROVs using just 1-2 pairs of copper wiring. Furthermore, these Deep Sea Speciality Extender products were able to drive data and power several thousands of feet, well beyond the IEEE 802.3 distance limit of just 328 feet or 100 meters. With no bridging in between!

This meant significantly fewer wires and resulted in a very thin, all copper cross-section tether to be thinned down to just 8.99mm. Whereas, at least 20mm tethers were the norm for traditional ROVs. This tremendously reduced the amount of drag upon ROVs and also meant that MiniROVs could often be lowered into the water by hand, without the need for expensive launching systems.

Not only did Enable-IT solve the issue of drag, weight, and gauge of the tether, but they also greatly increased the depth at which ocean exploration could be reached, provided extensive cost-savings to manufacturers of ROVs, and increased the efficiency of all deep sea navigation, discovery, and ocean cleanup.

Deep Sea Industries That Have Benefited
  • Ocean Surveillance
  • Oil Rig Maintenance & Up-Keep Operations
  • Oil Spill Disaster Clean Up Endeavors
  • Underwater Remote Operated Vehicle (ROV) Operation
  • Underwater MiniROV Operation
  • Deep Sea Mining
  • Deep Sea Exploration
  • NAVAL Operations
  • Ocean, Lake, River, & Harbor Dredging Machinery
  • Archeological Research & Discovery

The post DEEP SEA SPECIALITY EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>
MILITARY GRADE EXTENDER https://ethernetextender.com/military-grade-extender/ Sat, 28 Feb 2015 19:24:03 +0000 https://ethernetextender.com/?p=13794 ...

The post MILITARY GRADE EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>

Ruggedized, Military Grade Ethernet Extender Products Drive The US Armed Forces Keeping Them Safe & Secure In Times Of War

Key Benefits
  • Made in the USA – Professional, military grade extender products wholly designed and manufactured in America.
  • Ease of Deployment – Instant, plug-and-go devices for quick military base organization.
  • Maximum Security – Certified, secure encrypted, hardwired Ethernet extension communications.
  • High-Speed Performance – Guarantees the fastest transmissions of military base communications for vital operation mission data.
  • Monetary Savings – Extremely cost-effective solutions in lieu of fiber products or unsecured wireless communications.
  • Time Savings – Allows military base personnel an instant high-speed internet connection in minutes providing real-time data and mission control.

The Challenge

The USA have over 1,000 military bases worldwide which host about 160,000 US citizens and other personnel. These operations are used to combat strife and engaging enemies who present a threat to humanity and those unable to defend themselves. Thousands of weapons, bombs, vehicles, airplanes and other dangerous objects are stored at these locations required the highest security imaginable.

In lieu of this, these bases require the most secure and high-speed data networking communications. Wireless technology is out of the question as WiFi signals can be intercepted and are prone to hacking attempts from enemy countries. Fiber communications is extremely expensive and would cost tax payers billions or even trillions more dollars which is absolutely not in our best interests. The best alternative seems to be copper wire networking products, however there is a distance barrier presented by IEEE 802.3 Ethernet communications of 328 feet or 100 meters.

So how do military personnel bypass this distance limitation and provide the best possible solution to their extreme security needs while keeping their costs down?

Discovering the Solution

The answer is simple, Ethernet extension products. That is where Enable-IT, Inc. comes into play.

Enable-IT Ethernet extenders drive transparent network communications using any twisted pair copper wiring or Category Rated (CAT3 to CAT6 or better) over 9,000 feet or 2,743 meters! We also have the capability to send Power over Ethernet to distances of 2,500 feet or 762 meters while powering on multiple PoE LAN devices. All communications sent using the extenders are certified, secure encrypted and are tremendously cheaper than any fiber solution available.

Enable-IT offers Military Grade Extender Products custom tailored to any environment whether that be extreme desert heat like in the Middle East, or frigid cold mountain temperatures. Even the off-the-shelf products can be used in US Government or Military operations globally. Being an American-made manufacturer allows us to custom build any solution to fit stringent requirements of government agencies or military applications. Our products have been used in tethered military drones and bases, US NAVY vessels, International Space Station, traffic control systems, and hundreds of other applications. Waterproof, submersible versions of the Ethernet & PoE Extender product lines are also available.

Key Features
  • Professional, military grade products wholly designed and made in the USA.
  • Transparent Ethernet communications over 9,000 feet or 2,743 meters.
  • Plug and go installation, no configuration required.
  • Utilizes existing 1 pair wiring minimum or 2-4 pair wiring using any Category Rated cabling (CAT3 to CAT6 or better).
  • Versatile, small form factor for ease of deployment into any industry application.
  • Same day, insured, flat rate shipping in the USA
  • Limited Lifetime Warranty

The post MILITARY GRADE EXTENDER appeared first on Ethernet Extender PoE Extender Secure Encryption.

]]>