ENABLE-IT-265lLP-Kit
Enable-IT 265LP Lightning Protection KitEnable-IT 265LP Lightning Protection KitPole mountedEnable-IT-good-jobENABLE-IT-265lLP-Kit

Enable-IT 265LP Gigabit PoE Lightning Protection Kit

$95

MSRP $95     AWESOME SOLUTION FOR LIGHTNING PROTECTION

► Gigabit Weatherproof PoE and Ethernet Protection kit
► Two units for end to end protection of outdoor LAN runs
► Protect your investment where you are the most exposed, Outdoors
► Cheaper than Insurance or replacing your expensive LAN gear


The ENABLE-IT™ 265LP GIGABIT PoE LIGHTNING PROTECTION KIT is a set of compact weather resistant units that provide lightning and surge protection for Ethernet data applications. To protect your outdoor line and attached LAN equipment requires one unit on each end closest to your LAN gear, otherwise you're fooling yourself. These units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing lightning protection to both Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on RJ-45 pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum protection this kit provides two – one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT 265LP Gigabit Ethernet PoE Lightning Protection Kit is compatible with 10/100/1000 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE). For complete protection it is advised installing a 265LP kit near the LAN equipment on the originating LAN location and the remote end LAN location.


PROFESSIONAL BUSINESS GRADE PERFORMANCE,
RUGGEDIZED EXTREME TEMPERATURE ENCLOSURE


The compact weather resistant housing features a single port access and a lockable hinged cover that will not close while wires are being terminated. Mounting holes are provided on the rear. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. This lightning surge protector kit is compatible with Cisco Aironet 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

In-Stock    Product UPC: 896741002126    Post Install Ratings

SKU: 265LP Category:

Add to Cart ► Request a Quote ► Quote from Resellers ►

Description
The ENABLE-IT 265LP GIGABIT PoE LIGHTNING PROTECTION KIT is a set of compact weather resistant units that provides cost-effective solution for protecting PoE and Ethernet devices from damaging electrostatic discharge and surges.

The units are fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100/1000 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.

The internal High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The units are compatible with both normal and inverted polarity voltage PoE equipment.

For maximum protection this kit provides two 265LP units - one at each end of your Ethernet cable run. Most PoE capable equipment is not protected from surges on Ethernet cabling. The Enable-IT 265LP Gigabit Ethernet Lightning Protector Kit is compatible with 10 Base-T, 100 Base-T devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

These units will save your expensive LAN or PoE IP Equipment at both ends and they do their job by taking the brunt of a lightning strike damage. They are not repairable once they perform this task and will need to be replaced. If you live in a lightning prone area it is advisable to have a spare set for each outdoor line your trying to protect so that you maintain the safety of your expensive LAN and PoE Equipment.

  • Professional Business Grade Product, Solid reliability
  • Unique micro weatherproof design for wall mounting or pole mounting
  • Insured, Same Day Flat Rate Shipping - US Factory Floor Direct
  • 45-day Money Back Guarantee
Key Features
  • Weatherproof micro design ideal for wall or pole mounting.
  • All in one simple solution. that protects each end of your outdoor line.
  • Compatible with any IEEE 802.3 AF / AT PoE injector / Midspan up to 58V DC.
  • Network Equipment independence - Transparent to protocols, applications and MAC addresses.
  • Gigabit Ethernet and PoE compatible
This kit includes the following:
(2) Enable-IT 265LP Outdoor Lightning Protection units
(1) Enable-IT 265LP Quickstart Guide
Same Day Flat Rate Shipping - US Factory Floor Direct
Specifications
  • Power
  • ESD/EMP Protection - Absorbing Transient Current with Response to Surge Voltage from 100V/s to 1kV/µs
    DC Spark-Over Voltage - 90V @ 100V/s
    Impulse Spark-over Voltage - 700V @ 1kV/µs
  • Data Rate
  • Gigabit LAN full-duplex Ethernet Data & with simultaneous PoE delivery on all 8 pairs
  • Interface
  • Ethernet: (2) LAN RJ-45 ports
  • Dimensions
  • Height 3.5" (90mm) Depth 1.28" (32mm) Width 2.4" (61mm)
  • Environment
  • Operational Temperature: -22°F to 150°F (-30°to 65°C)
    Humidity: 10% to 90%, non-condensing
  • Enclosure
  • Ruggedized wall mount plastic casing with enclosed Network ports
Downloads
Enable-IT 265LP Gigabit Lightning Protection Kit
ENABLE-IT 265LP GIGABIT PoE LIGHTNING PROTECTION KIT
PRODUCT DATASHEET ►

QUICKSTART GUIDE ►

PRODUCT MANUAL ►

Diagrams
ENABLE-IT 265LP Installation OptionsENABLE-IT 265LP Installation Options - Click to see movie
ENABLE-IT 265LP GIGABIT PoE LIGHTNING PROTECTION KIT WIRING
Undeniable Benefits
  • Designed and Made in the USA

    Factory Direct Highest Quality Expert Product Engineering.
    Don't be fooled by foreign companies with US offices selling you cheap quality electronics from who knows where.
    Insist on USA made high quality equipment and support.
  • Professional Grade Equipment - Trusted Reliability

    (Ruggedized, Extreme Distance, Highest Throughput, OEM Customizable, Encrypted and Secure)
    Since 1997, we invented and have been manufacturing the highest quality Made in the USA Ethernet Extender and PoE Extender Solutions.
    US Factory Floor direct same day flat rate shipping.
  • Lifetime Product Warranty - Industry Leading

    Peace of Mind Longest Product Warranty in the industry - Limited Lifetime Product Warranty.
    Why would you waste your time and money with anything of inferior quality or from a company that doesn't stand behind it's own products?
  • 45-Day Money Back Guarantee

    For those who wish to try our superior USA engineered Ethernet and or PoE technology.
    We offers a gracious 45-Day trial period when purchasing single unit kits per our policy here .
  • Certified Spyware Free

    Buyer Beware! Knockoff competitors of our products have been banned by the US Govt for containing data stealing spyware.
    Our products are trusted in some of the most secure environments such as control of US Nuclear weapon systems through our national security contracts for the DOD and US Military.
  • No Configuration - Plug and Go - Highest Throughput

    All of our products are ready right out of the box.
    Simply connect the devices to your cabling and plug them in if they require a power adapter.
    There are no configuration parameters to set up! We even include your country-specific power adapters.
    Don’t settle for low bandwidth. And because we offer the highest speeds of any Ethernet Extender Manufacturer, we make sure you won’t have to.
    High performance solutions without compromise – that’s what you’ll get.
  • Same Day Flat Rate Shipping - US Factory Floor Direct

    Our US West coast AS9011D manufacturing facility processes all orders placed by 3:30pm PST and expedites for same day shipping worldwide.
    Flat Rate Domestic US Shipping - See our preferred shipping commitment here .
  • Next Business Day Advanced Replacement Service

    No other manufacturer in our industry can stand behind their products or services as well as Enable-IT does bar none.
    We offer a optional 4-Year peace of mind business continuity AREP (Next Business Day Advanced Replacement) service. - See our AREP policy here.
  • US Based Expert Technical Support and Customer Care Team

    No need to speak Mandarin or Urdo and or wait days to get timely support to technical questions answered.
    Our Expert Technical Customer Care Team along with our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
    We take great pride in listening to and understanding your needs and providing professional timely support.
  • Custom USA Made OEM Solutions

    If you need a design or specifications that are not in one of our products, our OEM Design engineers and manufacturing operations are all Proudly USA In-house.
    We can create tailored OEM solutions in days with minimum 10 unit quantity orders.
    Enable-IT Solutions can give you a strategic advantage in your marketplace - Try Us